In case your HVAC Myrtle Beach system is not running well as it is supposed to, you may be tempted to call a professional HVAC contractor right away. However, in certain instances, checking some things first could save you a lot of money and time.
Homeowners usually encounter harsh overnight temperatures during the winter season. In at least one scenario, residents had to endure a night where temperatures have plunged to – 20 degrees Fahrenheit. If you have to go through a situation like this, you need to act immediately. Check if you could make basic adjustments first rather than scrambling to have an HVAC repair scheduled right away.
Inspect The Air Filter
Decreased airflow prevents the ability of the HVAC unit to perform correctly. Consequently, energy efficiency will go down and your utility bills will go up. Among the most common causes of decreased air flow is a filthy filter. Begin there when HVAC issues happen and make sure that you replace the filter regularly to reduce the possibility of encountering problems.
Check The HVAC Thermostat
You also need to inspect the thermostat. If the thermostat setting is set incorrectly, it could lead to some problems. Even if you believe that you have already set everything appropriately, you need to check the thermostat to make sure that nothing was changed accidentally. It is really easy to switch the HVAC unit off from the thermostat. A lot of people have switched to air conditioning when they want to have heat and vice versa.
Check For Obstruction like Ice
In case the unit is icy, you have to switch it off. Next, search for any obstructions that may be blocking the filter and supply vents. Obstructions have to cleared away, and this might be sufficient to restore your HVAC unit to its full function. In case there are not anything or obstruction and it still doesn’t return to normal, make sure that you get in touch with a technician for help.
Check For Problems In The Power Supply
There could be a switch located close to the HVAC system that looks a lot like a light switch. This could easily be flipped off, bringing your home into what appears like a heating or cooling nightmare. Just flipping the switch back on must make all things work normally once again. Always remember that noticing a flash code is not an automatic sign that there is an issue. Inspect the heat pump panel if you want to get an explanation for every code. In case the flash code signals an operational problem, be sure to get in touch with a professional HVAC contractor.
Inspect The Panel Switch
Is there a loose panel on your HVAC’s air handler? The panel switch might have cut the power as a safety precaution. These panel switches were made to flip the switch if a panel is taken out or not linked properly. For example, you’ll most likely be able to fix the system yourself by just tightening or reattaching the panel.
There are several other times you need to watch out for. For instance, a heat pump might stop running if the utility company has stopped gas service. This does not mean you did not pay your bill but rather be an indication that there is a gas leak or someone from their billing department has committed a mistake. In case the gas valve has been locked and there is a red tag on the meter, call the gas company for more information.
Call DuctWorks Heating and Cooling, Inc. for all your HVAC related needs.
DuctWorks Heating and Cooling, Inc.
303 Main St
North Myrtle Beach, SC 29582
(843) 427-7411
https://www.ductworksheatingandcooling.com/
